apem www.apem.com a-85 1000 series t oggle switches - metal lever - economy range distinctive features and specifications a ? butt action contacts ? optional insulated levers (x213 and x490) materials ?case : phenolic resin ?actuator : - brass, nickel plated (1010 and 1020 models) - polyamide (1030 models) ?bushing : brass, nickel plated ?contacts : a : silver c : copper, silver plated electrical specifications ?max. current/voltage rating with resistive load : - silver contacts (a) : 3a 250vac - 6a 125vac - 6a 30vdc - silver plated copper contacts (c) : 2a 250vac ?initial contact resistance : 10 m ? max. at 1a 2vdc ?insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals 2.500 vrms 50 hz min. between terminals and frame ?electrical life : 10.000 cycles at full load general specifications ?torque : 1,50 nm (1.10 ft.lb) max. applied to nut ?panel thickness : 5 mm (.196) max. ?operating temperature : -20? to +55? dimensions : first dimensions are in mm while inches are shown as bracketted numbers. sealing boots are available to protect the switches against dust and water. they are presented in section h. mounting accessories : standard hardware supplied : - silver contact models : 1 hex nut u166 + 1 knurled nut u411 - copper contact models : 1 hex nut u42 + 1 knurled nut u411 packaging unit : 25 or 40 pieces depending on model. about this series
a-86 apem www.apem.com 1000 series t oggle switches - metal lever - economy range solder lug and quick-connect terminals - screw terminals a screw terminals solder lug and quick-connect terminals model structure iii iii 1011 on - off 1016 on - on 1019 on off on iii iii 1021 on - off 1026 on - on 1029 on off on ? 2 and 3 positions ?single pole configurations ? keyway ? keyway ? keyway 36? 12.00 22.50 (.031) (.472) (.886) 1.00 (.039) 9.20 (.362) (.413) 10.50 12.00 (.472) 12.00x0.75 si (.472diax0.75 is) 14.00 6.35 (.551) (.25) 12.00 12.00 28.00 (.472) (.472) (1.102) 0.8 18? 18? iii ii i i iii 15.00 (.925) 14.00 6.35 12.00 22.50 12.00x0.75 si (.472diax0.75 is) (.551) (.25) (.472) (.886) iii i 36 (.472) 12.00 10.50 (.413) 1.00 (.039) 8.50 (.334) (.039) 15.00 (.25x.031) (.334) (.118) (.118diax0.5 is) 3.00x0.5 si 6.35x0.80 8.50 3.00 (.25x.031) (.362) 6.35x0.80 9.20 4.50 (.177) 3.10 (.122dia) p anel cut - out (.20) (.066) (.48dia) 1.70 12.20 5.10 (.377) 12.50 (.492dia) (.137dia) 3.50 9.60 12.20 (.48dia)
apem www.apem.com a-87 1000 series t oggle switches - metal lever - economy range solder lug and quick-connect terminals - screw terminals a contact materials a silver c copper, silver plated x213 silver plated copper contacts (c) special options with insulated lever iii 1031cx213 off - on x490 a vailable with silver contacts (a) or silver plated copper contacts (c) iii iii 1036 x490 on - on 1039 x490 on off on ground connector u187 compulsory if the panel is not metallic or not connected to ground. order separately, see section i. ? keyway ? keyway 14.00 6.35 1.00 0.80 12.00 22.50 12.00x0.75 si (.492) 12.50 (.413) 10.50 12.00 (.472) (.472diax0.75 is) 36? (.031) (.039) (.551) (.25) (.472) (.886) 9.20 (.362) iii (.472) 6.35 14.00 12.00x0.75 si 12.00 12.00 28.00 (.472diax0.75 is) 36? (.472) (1.102) (.25) (.551) (.472) 12.00 10.50 (.413) 12.50 (.492) (.039) 1.00 (.031) 0.80 i iii (.362) 9.20 ii
|
